当前位置:Linux教程 - Linux综合 - Linux 安装U盘的过程

Linux 安装U盘的过程

  1:确定你的内核支持U番   :SCSI的选项默认就可以   :USB的选项一定要安装 USB Mass Storage support   :如下:   代码:   SCSI support    --- SCSI support type (disk, tape, CD-ROM)    SCSI disk support    (40) Maximum number of SCSI disks that can be loaded as modules    < > SCSI tape support    < > SCSI OnStream SC-x0 tape support    < > SCSI CD-ROM support    < > SCSI generic support    --- Some SCSI devices (e.g. CD jukebox) support multiple LUNs    [*] Enable extra checks in new queueing code    [*] Probe all LUNs on each SCSI device    [*] Verbose SCSI error reporting (kernel size +=12K)    [ ] SCSI logging facility    SCSI low-level drivers --->    PCMCIA SCSI adapter support --->    USB Mass Storage support    [ ] USB Mass Storage verbose debug    [ ] Freecom USB/ATAPI Bridge support    [ ] ISD-200 USB/ATA Bridge support    [ ] Microtech CompactFlash/SmartMedia support   2:fdisk -l /dev/sda看看有没有sda1列出来   3:如果有,   mkdir /mnt/usb   mount /dev/sda1 /mnt/usb -t vfat(当然也可能是msdos)   4:其他:   :在/etc/fstab里面加入:   [/code]/dev/sda1 /mnt/usb vfat user,noauto,codepage=936,iocharset=cp936,umask=022 0 0[/code]   可以保证任何一个用户都可以mount USB番,并且启动时不加载   :关于中文,在本站有很多相关的文章,自己编译内核,把CP936编译成为Native Language。

(出处:http://www.sheup.com)