----------------------------------------------------------
本文出处http://Linux-down.kmip.net ，如需转载请注明！
点击http://linux-down.kmip.net免费下载大量的linux学习资料,软件!
----------------------------------------------------------
1.下载rp-pppoe-3.5
2。解压和安装：
#tar zxvf rp-pppoe-3.5.tar.gz
进入解压目录执行
#sh ./go
3。配置
然后再来设置ADSL。这一处，我们要用命令。
#adsl-setup
Welcome to the Roaring Penguin ADSL client setup. First, I will run
some checks on your system to make sure the PPPoE client is installed
properly...
Looks good! Now, please enter some information:
USER NAME
>>> Enter your PPPoE user name (default XXX): 在这里输入ADSL的用户名
INTERFACE
>>> Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0):如果一张网卡就设置写上eth0
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default no):不用写什么
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here:在这里写上202.96.134.133
下一个DNS是202.96.168.68 //这里根据个人不同可以修改
----------------------------------------------------------
本文出处http://linux-down.kmip.net ，如需转载请注明！
点击http://linux-down.kmip.net免费下载大量的linux学习资料,软件!
----------------------------------------------------------
PASSWord
>>> Please enter your PPPoE password:输入密码
[1] [2] 下一页
>>> Please re-enter your PPPoE password:再输入一次
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
Access to all standard servers like Web, e-mail, FTP, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2):这里添写为2
** Summary of what you entered **
Ethernet Interface: eth0
User name: XXX
Activate-on-demand: No
DNS: Do not adjust
Firewalling: MASQUERADE
>>> Accept these settings and adjust configuration files (y/n)?
弄完后，就按一个y键。
不要急于连接,REBOOT -N
然后进入网络设置,设置ETH1固定IP，停止ETH1(我的是用他)
然后ADSL-START
PING 你的DNS,如果可以,那么,恭喜你!
如果不行，REBOOT -N
ADSL-START,这下没问题啦，尽情享受吧！
----------------------------------------------------------
本文出处http://linux-down.kmip.net ，如需转载请注明！
（出处：http://www.sheup.com）
上一页 [1] [2]
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2):这里添写为2
** Summary of what you entered **
Ethernet Interface: eth0
User name: XXX
Activate-on-demand: No
DNS: Do not adjust
Firewalling: MASQUERADE
>>> Accept these settings and adjust configuration files (y/n)?
弄完后，就按一个y键。
不要急于连接,REBOOT -N
然后进入网络设置,设置ETH1固定IP，停止ETH1(我的是用他)
然后ADSL-START
PING 你的DNS,如果可以,那么,恭喜你!
如果不行，REBOOT -N
ADSL-START,这下没问题啦，尽情享受吧！
----------------------------------------------------------
本文出处http://linux-down.kmip.net ，如需转载请注明！
（出处：http://www.sheup.com/）
上一页 [1] [2] [3]