因为我们学校的校园网是通过在本机运行一个客户端来上网的，所以我在Linux下上网必须使这个软件能够运行，才能上咱linuxsir,于是我就想着怎么来安装一个最新版的wine来让它支持汉字。 下面是我的安装步骤： 安装前的准备 把原先的wine卸载掉，redhat 7.3有wine和wine-devel两个文件，先卸载掉第二个，然后再卸载第一个，如果你更好的想玩游戏，把OPENGL也升级一下，freetype不用升级了，redhat 7.3自带的就可以满足汉字的支持了。 把你的C盘挂接在linux下，建立目录来挂接 c盘 mkdir /winc 挂接C盘 mount /dev/hda1 /winc 下载wine的最新版到/wind，[[The No.1 Link Start.]]http://www.winehq.com[[The No.1 Link End.]]上边有它的最新版wine-20020804.tar.gz。 以普通用户登录linux,把wine-20020804.tar.gz拷贝到/tmp目录下，进入/tmp目录。 shell〉cd /tmp 解压wine shell〉tar vfzx wine-20020804.tar.gz 进入解压后的目录 shell〉cd wine-20020804 用wine的安装工具进行安装 shell〉./tools/wineinstall 然后就是漫长的等待。 在安装过程中它要你回答yes/no,你选择yes就可以了。wine自动搜索windows的目录的，等你你编译完了，它要让你输入root的密码进入安装，这是就快安装完了，如果安装成功，就会有good lUCky的提示。 在shell下运行wine，第一次运行不成功，这是正常,因为没有在/root/.wine/config文件里配置好.找到这些吧。 [Drive C] "Path" = "/usr/share/win_c" "Type" = "hd" "Label" = "MS-DOS" "Filesystem" = "win95" 改为:[Drive C] "Path" = "/winc" "Type" = "hd" "Label" = "MS-DOS" "Filesystem" = "win95" 就可以了，如果你安装了simsun字体.wine默认就会找到这个字体的，下边就是我的/root/.wine/config。 WINE REGISTRY Version 2 ;; All keys relative to MachineSoftwareWineWineConfig ;; ;; MS-DOS drives configuration ;; ;; Each section has the following format: ;; [Drive X] ;; "Path"="xxx" (Unix path for drive root) ;; "Type"="xxx" (supported types are \'floppy\', \'hd\', \'cdrom\' and \'network\') ;; "Label"="xxx" (drive label, at most 11 characters) ;; "Serial"="xxx" (serial number, 8 characters hexadecimal number) ;; "Filesystem"="xxx" (supported types are \'msdos\'/\'dos\'/\'fat\', \'win95\'/\'vfat\', \'unix\') ;; This is the FS Wine is supposed to emulate on a certain ;; Directory structure. ;; Recommended: ;; - "win95" for ext2fs, VFAT and FAT32 ;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended) ;; DON\'T use "unix" unless you intend to port programs using Winelib ! ;; "Device"="/dev/xx" (only if you want to allow raw device Access) ;; [Drive A] "Path" = "/mnt/floppy" "Type" = "floppy" "Label" = "Floppy" "Serial" = "87654321" "Device" = "/dev/fd0" [Drive C] "Path" = "/winc" "Type" = "hd" "Label" = "MS-DOS" "Filesystem" = "win95" [Drive D] "Path" = "/mnt/cdrom" "Type" = "cdrom" "Label" = "CD-Rom" "Filesystem" = "win95" ; make sure that device is correct and has proper permissions ! "Device" = "/dev/cdrom" [Drive E] "Path" = "/tmp" "Type" = "hd" "Label" = "Tmp Drive" "Filesystem" = "win95" [Drive F] "Path" = "${HOME}" "Type" = "network" "Label" = "Home" "Filesystem" = "win95" [Drive Z] "Path" = "/" "Type" = "network" "Label" = "Root" "Filesystem" = "win95" [wine] "Windows" = "c:windows" "System" = "c:windowssystem" "Temp" = "e:" "Path" = "c:windows;c:windowssystem;e:;e: est;f:" "Profile" = "c:windowsProfilesAdministrator" "GraphicsDriver" = "x11drv" ; Wine doesn\'t pass directory symlinks to Windows programs by default. ; Enabling this may crash some programs that do recursive lookups of a whole ; subdir tree in case of a symlink pointing back to itself. ;"ShowDirSymlinks" = "1" "ShellLinker" = "wineshelllink" # 〈wineconf〉 [DllDefaults] ; "EXTRA_LD_LIBRARY_PATH" = "${HOME}/wine/cvs/lib" "DefaultLoadOrder" = "native, builtin, so" [DllOverrides] "commdlg" = "builtin, native" "comdlg32" = "builtin, native" "ver" = "builtin, native" "version" = "builtin, native" "shell" = "builtin, native" "shell32" = "builtin, native" "lzeXPand" = "builtin, native" "lz32" = "builtin, native" "comctl32" = "builtin, native" "commctrl" = "builtin, native" "wsock32" = "builtin" "winsock" = "builtin" "advapi32" = "builtin, native" "crtdll" = "builtin, native" "mpr" = "builtin, native" "winspool.drv" = "builtin, native" "ddraw" = "builtin, native" "dinput" = "builtin, native" "dsound" = "builtin, native" "mmsystem" = "builtin" "winmm" = "builtin" "msvcrt" = "native, builtin" "msvideo" = "builtin, native" "msvfw32" = "builtin, native" "mcicda.drv" = "builtin, native" "mciseq.drv" = "builtin, native" "mciwave.drv" = "builtin, native" "mciavi.drv" = "native, builtin" "mcianim.drv" = "native, builtin" "msacm.drv" = "builtin, native" "msacm" = "builtin, native" "msacm32" = "builtin, native" "midimap.drv" = "builtin, native" "wnASPi32" = "builtin" "icmp" = "builtin" [x11drv] ; Number of colors to allocate from the system palette "AllocSystemColors" = "100" ; Use a private color map "PrivateColorMap" = "N" ; Favor correctness over speed in some graphics operations "PerfectGraphics" = "N" ; Color depth to use on multi-depth screens ;;"ScreenDepth" = "16" ; Name of X11 display to use ;;"Display" = ":0.0" ; Allow the window manager to manage created windows "Managed" = "N" ; Use a desktop window of 640x480 for Wine ;"Desktop" = "640x480" ; Use XFree86 DGA extension if present "UseDGA" = "Y" ; Use XShm extension if present "UseXShm" = "Y" ; Enable DirectX mouse grab "DXGrab" = "N" ; Create the desktop window with a double-buffered visual ; (useful to play OpenGL games) "DesktopDoubleBuffered" = "N" ; Code page used for captions in managed mode ; 0 means default ANSI code page (CP_ACP == 0) "TextCP" = "0" ; Use this if you have more than one port for video on your setup ; (Wine uses for now the first \'input image\' it finds). ;; "XVideoPort" = "43" [fonts] ;Read documentation/fonts before adding aliases "Resolution" = "96" "Default" = "-misc-simsun-" [serialports] "Com1" = "/dev/ttyS0" "Com2" = "/dev/ttyS1" "Com3" = "/dev/ttyS2" "Com4" = "/dev/modem" [parallelports] "Lpt1" = "/dev/lp0" [spooler] "LPT1:" = "lpr" ;"LPT2:" = "gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -" ;"LPT3:" = "/dev/lp3" [ports] ;"read" = "0x779,0x379,0x280-0x2a0" ; "write" = "0x779,0x379,0x280-0x2a0" [spy] "Exclude" = "WM_SIZE;WM_TIMER;" [registry] ;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false. ;Defaults are read all, write to Home ; Global registries (stored in /etc) "LoadGlobalRegistryFiles" = "Y" ; Home registries (stored in ~user/.wine/) "LoadHomeRegistryFiles" = "Y" ; Load Windows registries from the Windows directory "
[1] [2] 下一页
（出处：http://www.sheup.com）
上一页 [1] [2]